Dynomotion

Group: DynoMotion Message: 1647 From: Orin Date: 8/6/2011
Subject: 16 & 26 Pin IDC Ribbon Cables
Hi Guys -

I've looked for these cables and can only find the 16 pin version.
Where can I find the 26 pin cable - And no, Google wasn't my friend on this search - :>)

A link to someone that sells both would be great.

Thanks in advance,
Orin
Group: DynoMotion Message: 1649 From: Tom Kerekes Date: 8/6/2011
Subject: Re: 16 & 26 Pin IDC Ribbon Cables
Hi Orin,
 
Winford sells the 40 wire ribbon by the foot for $0.60/ft. It is easy to tear it down to 26 wires.
 

Regards
TK
 

--- On Sat, 8/6/11, Orin <wa4tbr@...> wrote:

From: Orin <wa4tbr@...>
Subject: [DynoMotion] 16 & 26 Pin IDC Ribbon Cables
To: DynoMotion@yahoogroups.com
Date: Saturday, August 6, 2011, 5:05 AM

 
Hi Guys -

I've looked for these cables and can only find the 16 pin version.
Where can I find the 26 pin cable - And no, Google wasn't my friend on this search - :>)

A link to someone that sells both would be great.

Thanks in advance,
Orin

Group: DynoMotion Message: 1650 From: Ross Ferguson Date: 8/6/2011
Subject: Re: 16 & 26 Pin IDC Ribbon Cables
Hi Orin,
You could try element14.com.
They do both standard and shielded.
This is one of the results of a search that I did for shielded 26way -

http://nz.element14.com/jsp/search/browse.jsp?N=2106+212193+110138908+110128254&Ntk=gensearch&Ntt=shielded+ribbon&Ntx=mode+matchallpartial&D=*shielded*+*ribbon*&No=0&getResults=true&appliedparametrics=true&locale=en_NZ&divisionLo cale=en_NZ&catalogId=&prevNValues=2106+212193&filtersHidden=false&appliedHidden=false&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN%3D2106%2B212193%26Ntk%3Dgensearch%26Ntt%3Dshielded%2Bribbon%26Ntx%3Dmode%2Bmatchallpartial%26D%3D*shielded*%2B*ribbon*%26No%3D0%26getResults%3Dtrue%26appliedparametrics%3Dtrue%26locale%3Den_NZ%26divisionLocale%3Den_NZ%26catalogId%3D%26prevNValues%3D2106%2B212193

The shielded cable really is a must if you have any noise problems.
It cured problems on both my mill and my lathe.

Ross

P.S. you may have to copy and paste that link :)


On 7/08/2011 12:05 AM, Orin wrote:
 

Hi Guys -

I've looked for these cables and can only find the 16 pin version.
Where can I find the 26 pin cable - And no, Google wasn't my friend on this search - :>)

A link to someone that sells both would be great.

Thanks in advance,
Orin 


-- 
Ferguson Windmills Company
835 Old North Road,
R.D.2,    Waimauku,
New Zealand.  0882
Ph 64 9  411 8332       Mobile 027 282 7689
Fax 64 9 412 8655
E-mail   -  ferman@... 
http://www.windmills.co.nz
Group: DynoMotion Message: 1656 From: Orin Date: 8/7/2011
Subject: Re: 16 & 26 Pin IDC Ribbon Cables
--- In DynoMotion@yahoogroups.com, "Orin" <wa4tbr@...> wrote:
>
> Hi Guys -
>
> I've looked for these cables and can only find the 16 pin version.
> Where can I find the 26 pin cable - And no, Google wasn't my friend on this search - :>)
>
> A link to someone that sells both would be great.
>
> Thanks in advance,
> Orin
>

Thanks for the replies guys...
I think I'll go with Winford for the cable/connectors and their breakout and relay boards.

Orin